Host Type
If you're using a Synapse cable, your host is autodetected, so no
host bar codes need to be scanned. If not, select an IBM 46XX
or RS-232 host from the following bar code menus.
IBM 46XX Host Types
To select one of the following as a POS Interface, scan the
appropriate bar code below.
Note: To properly communicate with 468X/
5-8
LS 6000 Series Product Reference Guide
9X terminals, the driver
corresponding to the port being used
must be loaded and enabled when you
are configuring your terminal system.
See your terminal's operating manual
for details.
Port 5B