Table of Contents
Advertisement
Programming the LS 6000
T wo Discrete Lengths
This option allows you to decode only those codes containing
two selected lengths. For example, if you select Codabar Two
Discrete Lengths, then scan 0, 2, 1, 4, the only Codabar symbols
decoded are those containing 2 or 14 characters. Numeric bar
codes begin on page 5-117. If you make an error or wish to
change your selection, scan CANCEL on page 5-122.
CODABAR - TWO DISCRETE LENGTHS
Length Within Range
This option allows you to decode a code type within a
specified range. For example, to decode Codabar symbols
containing between 4 and 12 characters, first scan Codabar
Length Within Range. Then scan 0, 4, 1, and 2 (single digit
numbers must always be preceded by a leading zero). Numeric
bar codes begin on page 5-117. If you make an error or wish to
change your selection, scan CANCEL on page 5-122.
CODABAR - LENGTH WITHIN RANGE
5-83
Advertisement
Table of Contents
