Set Lengths For Code 39 - Symbol LS 6000 Series Product Reference Manual

LS 6000 Series Product Reference Guide

Set Lengths for Code 39

Lengths for Code 39 may be set for any length, one or two
discrete lengths, or lengths within a specific range. The length of
a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. If Code
39 Full ASCII is enabled, Length Within a Range or Any Length
are the preferred options.
One Discrete Length
This option allows you to decode only those codes containing a
selected length. For example, if you select Code 39 One Discrete
Length, then scan 1, 4, only Code 39 symbols containing 14
characters are decoded. Numeric bar codes begin on page 5-
117. If you make an error or wish to change your selection,
scan CANCEL on page 5-122.
CODE 39 - ONE DISCRETE LENGTH
5-64