Table of Contents
Advertisement
Programming the LS 6000
Pause Duration
This parameter allows a pause to be inserted at any point in the
data transmission. Pauses are set by scanning a two-digit
number (i.e., two bar codes), and are measured in 1/10 second
intervals. For example, scanning bar codes "0" and "1" inserts
a 1/10 second pause; "0" and "5" gives you a 1/2 second delay.
Numeric bar codes begin on page 5-117. If you make an error
or wish to change your selection, scan DATA FORMAT
CANCEL on page 5-94.
PAUSE DURATION
5-89
Advertisement
Table of Contents
