Chapter 2. Setup; Unpacking; Installing The Scanner Cable - Symbol LS 6000 Series Product Reference Manual

Chapter 2
Setup

Unpacking

Remove the scanner from its packing and inspect it for damage.
If the scanner was damaged in transit, call the Symbol Support
Center at one of the telephone numbers listed on page xii. KEEP
THE PACKING. It is the approved shipping container and
should be used if you ever need to return your equipment for
servicing.

Installing the Scanner Cable

To connect the cable to the LS 6000 scanner:
1. Switch off all devices connected to the LS 6000 cable.
2-1