Set Up
To an IBM 468x/469x Terminal, Port 5B RS-232C or
Synapse Host
Attach the Synapse Adapter cable to the Host port on the
scanner. Attach the appropriate Synapse cable to the
Adapter cable and to the host terminal. Attach the power
supply to the Power port. If additional scanning versatility
is desired, plug a Synapse-compatible scanner into the
Hand-Held Laser Scanner port
(Figure
2-4).
Synapse
Adapter Cable
p/n 25-17072-01
Host
LS 5700/
Terminal
LS 5800
Synapse Cable
Power
Figure 2-4. Connecting to an IBM Terminal Port 5B RS-232C
In this configuration, an external power supply is required.
2-5