Time-Out Between Decodes, Different Symbols - Symbol LS 6000 Series Product Reference Manual

LS 6000 Series Product Reference Guide
Time-out Between Decodes,
Different Symbols
This parameter sets the minimum time between decodes of
different symbols. It is programmable in 0.1 second increments
from 0.0 to 9.9 seconds.
Scan the bar code below, then scan two numeric bar codes
beginning on page 5-117, the first representing seconds, the
second tenths of seconds. If you make an error, or wish to
change your selection, scan CANCEL on page 5-122.
TIME-OUT BETWEEN DIFFERENT SYMBOLS
5-24