Trigger Mode - Symbol LS 6000 Series Product Reference Manual

Trigger Mode

Scan a bar code below to select one of the following trigger
modes:
!
In Triggered Omnidirectional Mode, an omnidirectional
scan pattern activates upon trigger pull.
!
In Triggered Single Scan Line Mode, a single scan line
appears upon trigger pull.
! If Combination Mode is selected, the omnidirectional
scan pattern is always on and ready to decode. When the
trigger is pulled, the scanner emits a single scan line to
decode, then reverts back to omnidirectional constant-
on. This mode is only for hand-held use.
TRIGGERED OMNIDIRECTIONAL MODE
5-16
LS 6000 Series Product Reference Guide