About This Guide; Introduction; Chapter Descriptions - Symbol P 300STD Product Reference Manual

About This Guide

Introduction

The P 300STD/FZY/PRO Scanner Product Reference Guide provides instructions for setting
up, programming, using, maintaining and troubleshooting the P 300STD, P 300FZY and P
300PRO scanner.

Chapter Descriptions

Chapter 1, Getting Started, provides a product overview and instructions on setting up your
scanner. Also included are detailed instruction on scanning 1- and 2-dimensional bar codes,
as well as definitions for each of the beeper indications.
Chapter 2, Programming the Scanner, contains all the bar codes necessary to program your
P 300 scanner.
Chapter 3, Advanced Data Formatting (ADF), explains how to customize scanned data
before transmission to your host.
Chapter 4, Maintenance and Troubleshooting, describes cleaning your scanner, and provides
a list of possible problems you may encounter with your scanner, and solutions to these
problems.
Appendix A, Programming Reference, provides information on AIM identifiers and prefix/
suffix values.
Appendix B, Keyboard Maps, illustrates the keyboard maps for use with the keyboard wedge
interface.
Appendix C, ASCII Character Set, provides a table of ASCII character conversions.
ix