Figure 130 Configuration Upload Successful; Figure 131 Network Temporarily Disconnected - ZyXEL Communications ZyWall P1 User Manual

ZyWALL P1 User's Guide
Note: Do NOT turn off the ZyWALL while configuration file upload is in progress.
After you see a "restore configuration successful" screen, you must then wait one minute
before logging into the ZyWALL again.

Figure 130 Configuration Upload Successful

The ZyWALL automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.

Figure 131 Network Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default ZyWALL LAN IP address
(192.168.167.1). See your Quick Start Guide or the appendix for details on how to set up your
computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
Chapter 16 Maintenance 245