Figure 17 Vpn Wizard: Network Setting; Table 13 Vpn Wizard: Network Setting - ZyXEL Communications ZyWall P1 User Manual

Figure 17 VPN Wizard: Network Setting

The following table describes the labels in this screen.

Table 13 VPN Wizard: Network Setting

LABEL
Network Policy Property
Active
Name
Network Policy Setting
Local Network
Starting IP
Address
Ending IP
Address/
Subnet Mask
Remote
Network
Chapter 3 Wizard Setup
DESCRIPTION
Select this checkbox to enable this VPN rule.
Type up to 32 characters to identify this VPN network policy. You may use any
character, including spaces, but the ZyWALL drops trailing spaces.
Local IP addresses must be static and correspond to the remote IPSec router's
configured remote IP addresses.
Select Single for a single IP address. Select Range IP for a specific range of IP
addresses. Select Subnet to specify IP addresses on a network by their subnet mask.
When the Local Network field is configured to Single, enter a (static) IP address on
the LAN behind your ZyWALL. When the Local Network field is configured to Range
IP, enter the beginning (static) IP address, in a range of computers on the LAN behind
your ZyWALL. When the Local Network field is configured to Subnet, this is a (static)
IP address on the LAN behind your ZyWALL.
When the Local Network field is configured to Single, this field is N/A. When the
Local Network field is configured to Range IP, enter the end (static) IP address, in a
range of computers on the LAN behind your ZyWALL. When the Local Network field
is configured to Subnet, this is a subnet mask on the LAN behind your ZyWALL.
Remote IP addresses must be static and correspond to the remote IPSec router's
configured local IP addresses.
Select Single for a single IP address. Select Range IP for a specific range of IP
addresses. Select Subnet to specify IP addresses on a network by their subnet mask.
ZyWALL P1 User's Guide
61