System Statistics - ZyXEL Communications ZyWall P1 User Manual

ZyWALL P1 User's Guide
Table 4 Navigation Panel: Menu Summary (continued)
LINK
REMOTE MGMT WWW
UPnP
LOGS
MAINTENANCE
LOGOUT

2.4.3 System Statistics

Click Show Statistics in the HOME screen. Read-only information here includes port status
and packet specific statistics. Also provided is "Up Time" and "poll interval(s)". The Poll
Interval(s) field is configurable.
46
TAB FUNCTION
Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTPS or HTTP to manage
the ZyWALL.
SSH Use this screen to configure through which interface(s) and from
which IP address(es) users can use Secure Shell to manage the
ZyWALL.
TELNET Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the
ZyWALL.
FTP Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the ZyWALL.
SNMP Use this screen to configure your ZyWALL's settings for Simple
Network Management Protocol management.
DNS Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the ZyWALL.
CNM Use this screen to configure your ZyWALL's CNM (Central
Network Management) settings to allow management from a
remote CNM server.
UPnP Use this screen to enable UPnP on the ZyWALL.
Ports Use this screen to view the NAT port mapping rules that UPnP
creates on the ZyWALL.
View Log Use this screen to view the logs for the categories that you
selected.
Log Settings Use this screen to change your ZyWALL's log settings.
Reports Use this screen to have the ZyWALL record and display the
network usage reports.
General This screen contains administrative.
Password Use this screen to change your password.
Time and Date Use this screen to change your ZyWALL's time and date.
F/W Upload Use this screen to upload firmware to your ZyWALL
Configuration Use this screen to backup and restore the configuration or reset
the factory defaults to your ZyWALL.
Restart This screen allows you to reboot the ZyWALL without turning the
power off.
Click this label to exit the web configurator.
Chapter 2 Introducing the Web Configurator