Table of Contents
Advertisement
Menu 24.7.2 - System Maintenance - Upload Router Configuration File
To upload router configuration file:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atlc" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
Xmodem upload on your terminal.
4. After successful firmware upload, enter "atgo" to restart the
router.
Warning:
1. Proceeding with the upload will erase the current router
configuration file.
2. The router's console port speed (Menu 24.2.2) may change when
it is restarted; Please adjust your terminal's speed accordingly . The
password (menu 23) may change also.
3. When uploading the DEFAULT configuration file, the console port speed
will be reset to 9600 bps and the password to "1234".
Figure 11-17
11.6.4 Upload Router configuration File using FTP
To transfer the firmware, follow the procedure below:
Step 6.
Launch the FTP client on your workstation.
Step 7.
Type open and the IP address of your Prestige.
Step 8.
Type root and your SMT password as requested.
Step 9.
Type put RouterConfiguration rom-0 where "RouterConfiguration" is the name of
your firmware upgrade file on your workstation and "rom-0" is the remote file name on the
Prestige.
Step 10. The system reboots automatically after a successful firmware upload
11.7 TFTP Transfer
In addition to the direct console port connection, the Prestige supports the up/downloading of the firmware
and the configuration file using TFTP (Trivial File Transfer Protocol) over LAN. Although TFTP should
work over WAN as well, it is not recommended.
To use TFTP, your workstation must have both telnet and TFTP clients. To transfer the firmware and the
configuration file, follow the next procedure:
System Maintenance
Do You Which To Proceed:(Y/N)
Menu 24.7.2 - System Maintenance - Upload Router Configuration File
Prestige 681 SDSL Router
.
11-15
Advertisement
Table of Contents
