Table 61 Certificates: Directory Server: Add - ZyXEL Communications ZyWall P1 User Manual

ZyWALL P1 User's Guide
The following table describes the labels in this screen.

Table 61 Certificates: Directory Server: Add

LABEL
Directory Service
Setting
Name
Access Protocol
Server Address
Server Port
Login Setting
Login
Password
Apply
Cancel
a. At the time of writing, LDAP is the only choice of directory server access protocol.
176
DESCRIPTION
Type up to 31 ASCII characters (spaces are not permitted) to identify this directory
server.
Use the drop-down list box to select the access protocol used by the directory
server.
LDAP (Lightweight Directory Access Protocol) is a protocol over TCP that
specifies how clients access directories certificates and lists of revoked
a
certificates.
Type the IP address (in dotted decimal notation) or the domain name of the
directory server.
This field displays the default server port number of the protocol that you select in
the Access Protocol field.
You may change the server port number if needed, however you must use the
same server port number that the directory server uses.
389 is the default server port number for LDAP.
The ZyWALL may need to authenticate itself in order to assess the directory
server. Type the login name (up to 31 ASCII characters) from the entity
maintaining the directory server (usually a certification authority).
Type the password (up to 31 ASCII characters) from the entity maintaining the
directory server (usually a certification authority).
Click Apply to save your changes back to the ZyWALL.
Click Cancel to quit configuring this screen and return to the Directory Servers
screen.
Chapter 10 Certificates