Secure Telnet Using Ssh Examples; Example 1: Microsoft Windows; Example 2: Linux; Figure 99 Ssh Example 1: Store Host Key - ZyXEL Communications ZyWall P1 User Manual

13.9 Secure Telnet Using SSH Examples

This section shows two examples using a command interface and a graphical interface SSH
client program to remotely access the ZyWALL. The configuration and connection steps are
similar for most SSH client programs. Refer to your SSH client program user's guide.

13.9.1 Example 1: Microsoft Windows

This section describes how to access the ZyWALL using the Secure Shell Client program.
1 Launch the SSH client and specify the connection information (IP address, port number
or device name) for the ZyWALL.
2 Configure the SSH client to accept connection using SSH version 1.
3 A window displays prompting you to store the host key in you computer. Click Yes to
continue.

Figure 99 SSH Example 1: Store Host Key

Enter the password to log in to the ZyWALL. The CLI prompt displays next.

13.9.2 Example 2: Linux

This section describes how to access the ZyWALL using the OpenSSH client program that
comes with most Linux distributions.
1 Test whether the SSH service is available on the ZyWALL.
Enter
telnet 192.168.167.1 22
computer attempts to connect to port 22 on the ZyWALL (using the default IP address of
192.168.167.1).
A message displays indicating the SSH protocol version supported by the ZyWALL.
Chapter 13 Remote Management
at a terminal prompt and press [ENTER]. The
ZyWALL P1 User's Guide
203