Introducing The Web Configurator; Overview; Accessing The Web Configurator - ZyXEL Communications ZyWall P1 User Manual

This chapter describes how to access the ZyWALL web configurator and provides an
overview of its screens.

2.1 Overview

The web configurator is an HTML-based management interface that allows easy ZyWALL
setup and management via Internet browser. Use Internet Explorer 6.0 and later or Netscape
Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See the Troubleshooting chapter to see how to make sure these functions are allowed in
Internet Explorer.

2.2 Accessing the Web Configurator

Follow the steps below to access the advanced web configurator screens.
1 Make sure your ZyWALL hardware is properly connected and prepare your computer/
computer network to connect to the ZyWALL (refer to the Quick Start Guide).
2 Launch your web browser.
3 Type "192.168.167.1" as the URL.
4 The initial screen displays. Refer to the Quick Start Guide for more information.
5 To log into the ZyWALL, click ADVANCED in the navigation panel.
Chapter 2 Introducing the Web Configurator
C
Introducing the Web
ZyWALL P1 User's Guide
H A P T E R
Configurator
2
39