Https Example; Table 70 Www - ZyXEL Communications ZyWall P1 User Manual

ZyWALL P1 User's Guide
The following table describes the labels in this screen.

Table 70 WWW

LABEL
HTTPS
Server
Certificate
Authenticate
Client
Certificates
Server Port
Server Access
Secure Client IP
Address
HTTP
Server Port
Server Access
Secure Client IP
Address
Apply
Reset

13.4 HTTPS Example

If you haven't changed the default HTTPS port on the ZyWALL, then in your browser enter
"https://ZyWALL IP Address/" as the web site address where "ZyWALL IP Address" is the IP
address or domain name of the ZyWALL you wish to access.
194
DESCRIPTION
Select the Server Certificate that the ZyWALL will use to identify itself. The
ZyWALL is the SSL server and must always authenticate itself to the SSL client (the
computer which requests the HTTPS connection with the ZyWALL).
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself to the ZyWALL by sending the ZyWALL a certificate. To do that
the SSL client must have a CA-signed certificate from a CA that has been imported
as a trusted CA on the ZyWALL (see
certificates for details).
The HTTPS proxy server listens on port 443 by default. If you change the HTTPS
proxy server port to a different number on the ZyWALL, for example 8443, then you
must notify people who need to access the ZyWALL web configurator to use "https:/
/ZyWALL IP Address:8443" as the URL.
Select a ZyWALL interface from Server Access on which incoming HTTPS access
is allowed.
You can allow only secure web configurator access by setting the HTTP Server
Access field to Disable and setting the HTTPS Server Access field to an
interface(s).
A secure client is a "trusted" computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyWALL using this
service.
A secure client is a "trusted" computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Appendix H on page 317 on importing
Chapter 13 Remote Management