LLDP configuration guidelines
When you configure LLDP, follow these guidelines:
•
To make LLDP take effect on a port, enable LLDP both globally and on the port.
To advertise LLDP-MED TLVs other than the LLDP-MED capabilities TLV, include the LLDP-MED
•
capabilities TLV.
To remove the LLDP-MED capabilities TLV, remove all other LLDP-MED TLVs.
•
To remove the MAC/PHY configuration TLV, remove the LLDP-MED capabilities set TLV first.
•
When the advertising of LLDP-MED capabilities TLV and MAC/PHY configuration/status TLV is
•
disabled, if the LLDP-MED capabilities set TLV is included, the MAC/PHY configuration/status TLV
is included automatically.
•
When you configure LLDP settings for ports in batch, if you do not set the TLVs, each port uses its
own TLV settings.
241