a.
Enter link aggregation interface ID 1.
b.
Select Static (LACP Disabled) for the aggregate interface type.
c.
Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
chassis front panel.
4.
Click Apply.
Figure 193 Creating static link aggregation group 1
Method 2: Create dynamic link aggregation group 1
1.
From the navigation tree, select Network > Link Aggregation.
2.
Click Create.
3.
Configure dynamic aggregation group 1:
a.
Enter link aggregation interface ID 1.
b.
Select Dynamic (LACP Enabled) for aggregate interface type.
c.
Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
chassis front panel.
4.
Click Apply.
214