Adding A Class - HP 1920 Gigabit Ethernet Switch Series User Manual

Recommended priority trust mode configuration procedure
Step
1. Configuring priority trust mode on a port

Adding a class

1. Select QoS > Classifier from the navigation tree.
2. Click the Add tab to enter the page for adding a class.
Figure 463 Adding a class
3. Add a class as described in
4. Click Add.
Table 151 Configuration items
Item
Classifier Name
Operator
Table 151.
Description
Specify a name for the classifier to be added.
Specify the logical relationship between rules of the classifier.
•
and—Specifies the relationship between the rules in a class as logic AND. The
device considers a packet belongs to a class only when the packet matches all the
rules in the class.
•
or—Specifies the relationship between the rules in a class as logic OR. The device
considers a packet belongs to a class as long as the packet matches one of the rules
in the class. The device does not support this operator.
478
Remarks
Required.
Set the priority trust mode of a port.