HP 1920 Gigabit Ethernet Switch Series User Manual page 57
Hp 1920 gigabit ethernet switch series
Hide thumbs
Also See for 1920 Gigabit Ethernet Switch Series:
- User manual (547 pages) ,
- Getting started manual (33 pages) ,
- Supplementary manual (63 pages)
Table of Contents
Advertisement
Figure 31 Configuring global parameters for the stack on Switch A
Switch A becomes the master device.
2.
Configure a stack port on Switch A:
a.
In the Port Settings area on the Setup tab, select GigabitEthernet1/0/1.
b.
Click Enable.
Figure 32 Configuring a stack port on Switch A
3.
On Switch B, configure GigabitEthernet 1/0/2 (connected to Switch A), GigabitEthernet 1/0/1
(connected to Switch C), and GigabitEthernet 1/0/3 (connected to Switch D) as stack ports:
a.
Select Stack from the navigation tree of Switch B.
b.
In the Port Settings area on the Setup tab, select GigabitEthernet1/0/1, GigabitEthernet1/0/2,
and GigabitEthernet1/0/3.
c.
Click Enable.
44
Hide quick links:
Advertisement
Table of Contents
