Displaying Rmon Statistics - HP 1920 Gigabit Ethernet Switch Series User Manual

Item
Interval
Sample Type
Owner:
Alarm:
Create Default Event
Rising Threshold
Rising Event
Falling Threshold
Falling Event

Displaying RMON statistics

1. Select Device > RMON from the navigation tree.
The page in
2. Click the
Figure 80 appears.
icon for the statistics entry of an interface.
Description
Set the sampling interval.
Set the sampling type:
•
Absolute—Absolute sampling to obtain the value of the
variable when the sampling time is reached.
•
Delta—Delta sampling to obtain the variation value of the
variable during the sampling interval when the sampling
time is reached.
Set the owner of the alarm entry.
Select whether to create a default event.
The description of the default event is default event, the action
is log-and-trap, and the owner is default owner.
If there is no event, you can create the default event. And when
the value of the alarm variable is higher than the alarm rising
threshold or lower than the alarm falling threshold, the system
adopts the default action log-and-trap.
Set the alarm rising threshold.
Set the action that the system takes when the value of the alarm
variable is higher than the alarm rising threshold.
If you select the Create Default Event box, this option is not
configurable.
Set the alarm falling threshold.
Set the action that the system takes when the value of the alarm
variable is lower than the alarm falling threshold.
If you select the Create Default Event box, this option is not
configurable.
101