Recommended Vlan Configuration Procedures; Recommended Configuration Procedure For Assigning An Access Port To A Vlan; Recommended Configuration Procedure For Assigning A Trunk Port To A Vlan - HP 1920 Gigabit Ethernet Switch Series User Manual

Recommended VLAN configuration procedures

Recommended configuration procedure for assigning an
access port to a VLAN
Step
1. Creating
2. Configuring the link type of a
3. Setting the PVID for a
Configuring the access ports as untagged
4.
members of a VLAN:
a. Selecting VLANs
Specify the range of VLANs available for
selection during related operations.
Configure a subset of all existing VLANs.
This step is required before you perform
operations on the Detail, Modify VLAN,
and Modify Port tabs.
b. Modifying a VLAN
Configure the access ports as untagged
members of the specified VLAN.
5. Modifying
Recommended configuration procedure for assigning a trunk
port to a VLAN
Step
1. Creating
2. Configuring the link type of a
VLANs.
port.
port.
ports.
VLANs.
port.
Remarks
Required.
Create one or multiple VLANs.
Optional.
Configure the link type of the port as access.
By default, the link type of a port is access.
Configure the PVID of the
access port.
N/A
Configure the untagged
VLAN of the port.
Remarks
Required.
Create one or multiple VLANs.
Optional.
Configure the link type of the port as trunk.
To configure a hybrid port as a trunk port, first configure it
as an access port.
By default, the link type of a port is access.
137
Required.
An access port has only
one untagged VLAN and
the untagged VLAN is its
PVID. The three operations
produce the same result,
and the latest operation
takes effect.
By default, an access port
is an untagged member of
VLAN 1.