HP 1920 Gigabit Ethernet Switch Series User Manual page 95

Figure 67 Modifying ports
3. Configure ports for the mirroring group as described in
4. Click Apply.
A progress dialog box appears.
5. After the success notification appears, click Close.
Table 17 Configuration items
Item Description
ID of the mirroring group to be configured.
Mirroring
The available groups were added previously.
Group ID
Select a Local mirroring group ID to configure ports for the local mirroring group.
Configure ports for a local mirroring group:
•
Port Type Monitor Port—Configures the monitor ports for the local mirroring group.
•
Mirror Port—Configures mirroring ports for the local mirroring group.
Set the direction of the traffic monitored by the monitor port of the mirroring group:
•
both—Mirrors both received and sent packets on mirroring ports.
Stream
Orientation
•
inbound—Mirrors only packets received by mirroring port.
•
outbound—Mirrors only packets sent by mirroring ports.
Click the ports to be configured on the chassis front panel. If aggregate interfaces are
configured on the device, the page displays a list of aggregate interfaces below the chassis
Select port(s)
front panel. You can select aggregate interfaces from this list and configure them as
mirroring ports of a port mirroring group.
Table
82
17.