Configuring Queue Scheduling On A Port - HP 1920 Gigabit Ethernet Switch Series User Manual

Figure 470 Applying a policy to a port
3. Apply a policy to a port as described in
4. Click Apply.
Table 158 Configuration items
Item
Please select a policy
Direction
Please select port(s)

Configuring queue scheduling on a port

1. Select QoS > Queue from the navigation tree.
2. Click Setup to enter the queue scheduling configuration page.
Figure 471 Configuring queue scheduling
3. Configure queue scheduling on a port as described in
4. Click Apply.
Table
Description
Select an existing policy in the list.
Set the direction in which the policy is to be applied.
•
Inbound—Applies the policy to the incoming packets of the specified ports.
•
Outbound—Applies the policy to the outgoing packets of the specified ports.
Select one port to which the QoS policy is to be applied on the chassis front panel.
485
158.
Table 159.