Directional Size Magnification (Inch) - Lanier 5484 Operator's Manual

Copying

Directional Size Magnification (inch)

The suitable reproduction ratios will be automatically selected when you enter
the horizontal and vertical lengths of the original and copy image you require.
2
2
1: Horizontal original size
2: Vertical original size
3: Horizontal copy size
4: Vertical copy size
Preparation
Specify the vertical and horizontal sizes of the original and those of the copy,
as shown in the illustration.
Note
You can enter sizes within the following ranges:
Metric version
Inch version
You can select ratios within the following range:
• Metric version: 25 - 400%
• Inch version: 25 - 400%
If the calculated ratio is over the maximum or under the minimum ratio, it is
corrected within the range of the ratio automatically. However, with some ra-
tios, parts of the image might not be copied or blank margins will appear on
copies.
82
1
3
4
CP2M01EE
1 – 999 mm (in 1 mm steps)
0.1" – 99.9" (in 0.1" steps)