Table of Contents
Advertisement
To set the original on the exposure glass or in the document feeder using
Batch/SADF mode
Reference
P.32 "Batch/SADF Mode".
A Set the first page of your original, then press the {Start} key.
Note
The last page should be on the bottom.
B After it has been scanned in, set the next original then press the {Start}
key.
Note
Set the original in the same direction as the first one.
C After all originals have been scanned in, press the {#} key.
The copies are delivered to the tray.
To stop scanning temporarily
A
Press the {Stop} key to stop originals being scanned into memory.
To resume scanning
A Press the [No] key to resume scanning.
Note
Scanned images in memory are not cleared.
To stop scanning and clear all scanned images from memory
A Press the [Yes] key.
If memory reaches 0 %
Scanning will be stopped if the size of scanned image data exceeds memory ca-
pacity.
Note
There is enough memory to store approximate 1,000 originals of A4, 8
11" size. The number of originals that can be stored in memory varies depend-
ing on the memory settings and original type.
Sort
2
1
/
"
2
45
Advertisement
Table of Contents
