Lanier 5484 Operator's Manual page 64

Lanier digital copier operator manual
Table of Contents

Advertisement

Copying
When the indicator to remove staple waste appears, call your service repre-
sentative.
Reference
For how to replenish the staple supply, see
For how to clear staple jams, see
2
-Stapling Position
When there is copy paper identical in size and direction to your original, the sta-
pling position is see
Note
You cannot change the stapling position during copying.
When the original image is rotated, the stapling direction turns by 90 .
With "Top" or "Bottom" selected as the stapling position, if no paper is avail-
able oriented in the same direction as the original, the image will be rotated
and the paper of the same size as the original but oriented in the different di-
rection will be selected.
You can select the image on the fourth staple key as "Bottom" or "Top 2".
The maximum original image size that can be rotated is as follows:
Metric version
Inch version
You cannot use the Image Rotation function when "Top Slant", "Left 2" or
"Top 2" is selected.
A
Select one of the four stapling positions.
B
Enter the number of copy sets with the number keys.
C
Set your originals in one of the following ways.
To set the original in the document feeder
A Set a stack of originals in the document feeder, then press the {Start} key.
50
P.302 " e Removing Jammed Staples".
P.338 "Stapling Position"
A4
1
8
/
P.299 " d Adding Staples".
"
11"
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

55055485

Table of Contents