If You Cannot Make Clear Copies - Lanier 5484 Operator's Manual

If You Cannot Make Clear Copies

Problem
Copies appear dirty.
The reverse side of an orig-
inal image is copied.
A shadow appears on cop-
ies when copying pasted
originals.
The same copy area is dirty
whenever making copies.
Copies are too light.
Parts of the image are not
copied.
Copies are blank.
A moiré pattern is pro-
duced on copies.
R
Cause
The image density is too
dark.
Auto Image Density is not
selected.
The image density is too
dark.
Auto Image Density is not
selected.
The image density is too
dark.
The exposure glass or doc-
ument feeder belt is dirty.
The image density is too
light.
Damp or rough grain copy
paper is being used.
Toner cartridge is almost
empty.
The original is not set cor-
rectly.
An improper paper size is
selected.
The original is not set cor-
rectly.
Your original has a dot pat-
tern image or many lines.
If You Cannot Make Clear Copies
Action
Adjust the image density
P.34 "Adjusting Copy Im-
age Density".
Select Auto Image Density.
Adjust the image density
P.34 "Adjusting Copy Im-
age Density".
Select Auto Image Density.
Adjust the image density
P.34 "Adjusting Copy Im-
age Density".
Set the original in a differ-
ent direction.
Fix mending tape to the
pasted part.
Clean them P.337
"Maintaining Your Ma-
chine".
Adjust the image density
P.34 "Adjusting Copy Im-
age Density".
Use dry paper without a
rough grain.
P.283 " D
Add toner
Changing the Toner Bottle".
Set originals correctly
P.26 "Setting Originals".
Select the proper paper
size.
Set originals correctly
P.26 "Setting Originals".
Place the original on the
exposure glass at a slight
angle.
5
271