Auto Reset - Lanier 5484 Operator's Manual

Copying
F
Enter the number of copies required with the number keys.
2
Note
The maximum copy quantity can be set between 1 and 9999 (default: 9999).
See "Maximum Copy Quantity"
To change the number entered, press the {Clear} key and enter the new
number.
G
Press the {Start} key.
The machine starts copying.
Note
Usually, when you set a single original on the exposure glass or in the doc-
ument feeder, the copies are delivered face-up. However, with some func-
tions copies will be delivered face-down.
You can choose to have copies delivered either face up or face down. See
"Face-up/down Eject From Platen"
To stop the machine during a multi-copy run, press the {Stop} key.
To clear these copy job settings and return the machine to the initial condi-
tion after copying, press the {Clear Modes} key.

-Auto Reset

The machine automatically returns to the initial condition a fixed period of time
after your job is finished. This function is called "Auto Reset".
Note
You can change the Auto Reset delay. See "Copy Reset Timer"
eral Features".
24
P.312 "General Features".
P.328 "Input/Output".
P.312 "Gen-