Border Erase - Lanier 5484 Operator's Manual

Copying

Border Erase

2
Limitation
This function will not take effect if the size of the original cannot be detected.
Note
You can change the width of the erased margin as follows:
Metric version
Inch version
Note
The default width of the erased margin is as follows. You can change this set-
tings with the User Tools. See "Border Erase Width"
Metric version
Inch version
.
The width of the erased margin varies depending on the reproduction ratio.
If the size of the original is different from sizes listed in the following chart,
the erased margin might be shifted.
Metric version
Where Original Is Set
Exposure glass
Document feeder
*1
You can select from 8
tem Settings). See "Original: F/F4 Size Setting" in the System Settings manual.
132
3 – 50 mm (in 1 mm steps)
0.1" – 2.0" (in 0.1" steps)
10 mm
0.4"
Paper Size and Orientation
A3L, B4L, A4KL, B5KL, 8
A3L, B4L, A4KL, B5KL, A5KL, B6KL, 11"
17"L, 11" 15"L, 8
*1
1 2 1 4
/ " 13", 8 / " 13" and 8 " 13" with the User Tools (Sys-
P.318 "Adjust Image"
1 2
/ " 13"L
2 1 1 2
/ " 11"KL, 8 / " 13"L
*1