Back Covers - Lanier 5484 Operator's Manual

Back Covers

The last pages of your originals are copied on specified paper.
Copy
4
3
2
1
Blank
Preparation
Before selecting this function, set the tray for back cover paper and slip sheet
paper. See "Tray Paper Settings" in the System Settings manual.
The cover or slipsheets should be identical in size and direction as the copy
paper.
Note
You can specify whether to a copy on the back cover. If you select [Copy], the
last page will be copied on the cover sheet. If you select [Blank], a cover sheet
will just be inserted after the last copy.
You can specify to print the back cover side on the back or inside of the cover
sheet. See "Copy Back Cover"
If [Blank] mode is selected, the back cover will not be counted as a copy.
A
Press the [Cover/Slip Sheet] key.
4
3
2
1
GCCOVE1J
P.318 "Adjust Image".
Back Covers
2
151