Selecting Copy Paper - Lanier 5484 Operator's Manual

A
Press the appropriate key to select the original type.
Note
If you do not wish to set any other functions, press the {Start} key to start
copying.

Selecting Copy Paper

There are two ways to select copy paper:
Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the
original size and the reproduction ratio
Manual Paper Select
Choose the tray containing the paper you wish to copy onto: Paper Tray,
Large Capacity Tray (LCT).
Note
Auto Paper Select mode is intended for normal and recycled paper.
If you set all the paper trays other than "Plain" or "Recycled Paper", you can-
not use Auto Paper Select.
Refer to the following table for possible copy paper sizes and directions with
Auto Paper Select (when copying at a ratio of 100 %):
Metric version
Where Original Is Set
Exposure glass
Document feeder
*1
You can select from 8
tem Settings). See "Original: F/F4 Size Setting" in the System Settings manual.
Paper Size and Direction
A3 L, B4 L, A4 KL, B5 KL, A5 K, 8
*1
L
A3 L, B4 L, A4 KL, B5 KL, A5 KL, 11" 17"
L, 11" 15" L, 8
1 1
/ " 13", 8 / " 13" and 8"
2 4
P.39 "Image Rotation".
1 1
/ " 11" KL, 8
2
13" with the User Tools (Sys-
Basic Functions
1
/ " 13"
2
*1
/ " 13" L
2
37
2