Lanier 5484 Operator's Manual page 155

D
Input the value of X1, then press the [#] key or [X2] key.
Note
To change the length entered, press the {Clear} key on the control panel or
[Clear] key on the display panel and enter the new length.
E
Input the value of X2, then press the [#] key or [Y1] key.
F
Input the value of Y1, then press the [#] key or [Y2] key.
G
Input the value of Y2, then press the [#] key.
Note
To change the number entered, press the item that you want to change and
enter the new number.
H
Set your originals then press the {Start} key.
Delete Area
2
141