Table of Contents
Advertisement
Connect Copy (Option)
Using Connect Copy
You can select Connect Copy mode from either of the two connected machines
by pressing the [Connect] key. The machine you use becomes the master unit,
and the other machine the sub-unit.
Limitation
Once Connect Copy is selected, you must carry out all operations on the mas-
ter unit.
A
Make sure the machine is in copy mode.
4
Note
If user codes are turned on, enter a user code programmed in the master
unit with the number keys (up to 8 digits) then press the [#] key. You don't
need to enter the user code for the sub-unit.
Reference
See
B
Press the [Connect] key on the machine that is to be the master unit.
When the key darkens, the two machines are connected.
Master unit display
246
P.70 "User Codes".
Advertisement
Table of Contents
