Combine - Lanier 5484 Operator's Manual

Problem
In Centre/Border mode,
parts of the original image
are not copied.
In Margin Adjustment
mode, parts of the original
image are not copied.
In Image Repeat mode, the
original image is not copied
repeatedly.

Combine

Problem
You cannot make a book
from a booklet or magazine
by folding copies.
Parts of the image are not
copied.
Cause
You set too wide an erased
margin.
Your original has narrow
margins on four sides.
You set too wide an erased
margin.
You selected the same size
copy paper as originals,
and did not select the prop-
er reproduction ratio.
Cause
Combine Original Booklet
Format or Combine Origi-
nal Magazine Format is not
correct.
You specified an improper
reproduction ratio that
does not meet the sizes of
your originals and copy pa-
per.
Your originals are not iden-
tical in size and direction.
If You Cannot Make Copies As You Want
Action
Make the margin narrower
with the User Tools. See
"Border Erase Width" and
"Centre Erase Width"
P.318 "Adjust Image".
Set a narrower margin
with the User Tools. See
"Front Margin: Left/
Right" and "Back Margin:
Left/Right" P.318 "Ad-
just Image".
Select copy paper larger
than the originals.
Select the proper repro-
duction ratio.
Action
Change the setting
"Combine".
When you specify a repro-
duction ratio using Manu-
al Paper Select mode,
make sure the ratio match-
es your originals and the
copy paper.
Note
Select the correct repro-
duction ratio before us-
ing Combine mode.
Use originals that are iden-
tical in size and direction.
5
P.90
273