Lanier 5484 Operator's Manual page 112

Copying
D
Press the [4 Pages] key.
2
E
Check the orientation.
Note
To change the orientation to "Top to Bottom", press the [Orientation] key,
then press the [Top to Bottom] key. If you do not, go to step F.
The default setting is "Top to Top". You can change this setting with the
copy User Tools.
To select "Top to Bottom"
A Press the [Orientation] key.
B Press the [Top to Bottom] key, then press the [OK] key.
F
Select the paper.
G
Set your originals then press the {Start} key.
98
P.312 "General Features".