Combine Copying - Lanier 5515 Operator's Manual

Combine Copying

Combine Copying
Combine copy, combines originals into one copy. You cannot use the Duplex or the Bypass
Tray with this feature. There are two types of copies that you can make in this mode:
1. 1 Sided 2 Pages to Combine 1 Side: Copies two 1-sided originals to one side of a
2. 1 Sided 4 Pages to Combine 1 Side: Copies four 1-sided originals together to one
Direction of Originals and Layout of Combined Images
Portrait Originals
4 - 4
sheet.
side of a sheet.
•
The number of originals copied (combined) can be 2 or 4.
•
In this mode, the machine selects the reproduction ratio automatically. This reproduction
ratio depends on the copy paper sizes and the number of originals.
•
You can change the reproduction ratio from 50–200%.
•
When you set the originals in the document feeder and the machine is installed the
extension memory, you can change the reproduction ratio from 25–400%
•
If the calculated ratio is under the minimum ratio, it is corrected within the range of the
ratio automatically. However, with some ratios, parts of the image might not be copied
or blank margins appear on copies.
•
Even if the direction of originals is different from that of the copy paper, the machine
will automatically rotate the image by 90 to make copies properly. (When the Auto
Reduce/Enlarge function is selected.
•
You can make copies even if the number of originals is less than the number
required in the selected mode.
•
When the number of originals placed is less than the number specified for
combining, the last page(s) will be copied blank as shown in the illustration.
Copying Methods