Can Not Make Proper Copies; General; Adjust Image - Lanier 5635 Operator's Manual

Can Not Make Proper Copies

Can Not Make Proper Copies

General

Problem
Copies are not stapled.
Staples are not positioned
correctly.
Misfeeds occur frequently.
You cannot combine several
functions.
When sorting the pages are
divided into two blocks.

Adjust Image

Problem
In Double Copy mode, parts of
the original image are not
copied.
In Border, Center, or Center/
Border modes, parts of the
origianl image are not copied.
In Margin Adjustment mode,
parts of the original image are
not copied.
In Image Repeat mode, the
orignal image is not copied
completely.
9 - 26
Cause
The stapler is jammed.
The number of copies exceeds
teh capacity of the stapler.
Copy paper is curled.
Originals are not set correctly.
Copy paper size setting is not
correct.
Selected functions cannot be
used together.
The memory became full in the
middle of sorting and the pages
were ejected in two blocks.
Cause
Combination of original and
copy paper is not correct.
Wide erase margins are set.
Orignals ar not scanned
correctly.
Wide erase margins are set.
There is a lack of margin space
on the oppossite side of the
binding position.
You selected the same size copy
paper as the originals and did
not select theproper
reproduction ratio.
Action
Remove the jammed staples.
Check the stapler capacity.
Turn the copy paper over inthe
paper tray.
Place the original on the upper
left corner of the exposure
glass.
Set theproper paper size.
Check combination functions.
You can interrupt the copying
when the memory becomes full.
Action
Select proper paper.
Set narrow margins.
Set narrow margins.
Delect copy paper larger than
the origianls.
Select the proper reproduction
ratio.
Service and Supplies