Interrupt Copy; Original Beeper - Lanier LD 035 Operator's Manual

AdonisC3_GBcopyF_FM1.book Page 16 Thursday, November 28, 2002 1:53 PM
Copying

Interrupt Copy

Use this function if you want to inter-
rupt a long copy job to make urgently
needed copies.
Limitation
2
❒ You cannot use the Interrupt Copy
function when fax originals are be-
ing scanned or the scanner func-
tion is being used.
A A A A
Press the { { { { Interrupt} } } } key.
The Interrupt indicator goes on.
When the originals stop scanning
A Remove the originals that were
being copied and place the
originals you want to copy.
B Press the { { { { Start} } } } key.
The machine starts making the
copies.
C When copying is complete, re-
move the originals and copies.
D Press the { { { { Interrupt} } } } key again.
The Interrupt indicator goes off.
E When the display prompts
you, place the remaining origi-
nals again before interrupting.
F Press the { { { { Start} } } } key.
Note
❒ The interrupt copy job set-
tings will be restored and the
machine will continue copy-
ing from where it left off.
16
When the machine keeps copying
A Place the originals you want to
copy.
B Press the { { { { Start} } } } key.
The machine stops the previous
original job and starts copying
the original.
C When copying is complete, re-
move originals and copies.
D Press the { { { { Interrupt} } } } key again.
The Interrupt indicator goes off.
The interrupt copy job settings
will be restored and the ma-
chine will continue copying
from where it left off.

Original Beeper

The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
after copying.
Note
❒ See p.92 "Tone: Original remains".