Fuji Xerox ApeosPort-V C5575 User Manual page 59

C3 Finisher (optional), C3 Finisher with Booklet Maker (optional), and Folder Unit CD1
(optional)
No. Component
1 Tri-fold output tray button
(When the optional Folder
Unit CD1 is installed)
2 Hole-punch waste container
3 Output tray
4 Finisher tray
5 Staple cartridge
6 Booklet tray
7 Finisher front door
8 Booklet unit
9 Booklet staple cartridge
10 Tri-fold output tray
(When the optional Folder
Unit CD1 is installed)
11 Folder Unit cover
(When the optional Folder
Unit CD1 is installed)
1 2
12 11 10 9 8
Press this button to open the tri-fold output tray.
Collects punch scraps from the puncher. Remove this container when
discarding the scraps.
Outputs are delivered here.
Outputs are delivered here.
Staples are stored in this cartridge. Pull out this cartridge to replace staples
or clear staple jams.
Bound booklets are delivered here.
Open this door to clear paper or staple jams, replace staples, or discard
punch scraps.
This unit is for folding outputs in half and stapling the folded outputs.
Two staple cartridges for booklet creation. Take out the cartridges when
clearing stapled jams, or when replacing them with new ones.
Tri-folded outputs are delivered here.
Open this door to clear paper jams.
Machine Components
Function
3
4
5
6
2
7
59