Switching The Power Off - Fuji Xerox ApeosPort-V C5575 User Manual

2 Product Overview
Switch the power off at the end of the day or when not using the machine for an extended
period of time.
You can also use the Energy Saver feature to save power consumption while the machine is
not in use.
For information on the Energy Saver feature, refer to "Energy Saver Mode" (P.66).
Important • If the power is switched off, all the services of the machine will stop. When using the machine
1
Press the push-button power switch to switch
the power on.
2
Note

Switching the Power Off

The following describes how to switch the power off.
1
Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator is not blinking.
Important • Do not switch the power off in the following situations. If the power is switched off, the processing
62
throughout the day for jobs such as receiving fax, do not switch the power off.
When the Finisher-B1 (optional), the C3
Finisher (optional), or the C3 Finisher with
Booklet Maker (optional) is installed.
• The "Please wait..." message indicates that
the machine is warming up. The machine is
not available during warming up.
• If the machine does not power on, check the
following:
- The power cord is plugged in.
- The main power is switched on.
- The <RESET> button is set on and is in the
depressed position.
data may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.