Step 2 Selecting Features - Fuji Xerox ApeosPort-V C5575 User Manual

3 Copy
1
Open the document cover.
Important • Make sure that the touch screen is active, and
2
Load the document face down, and align it
against the top left corner of the document
glass.
3
3
Close the document cover.
Note

Step 2 Selecting Features

The following two services are available to copy documents.
Simple Copy
Allows you to only select basic features to copy documents.
Copy
Allows you to make detailed settings to copy documents.
The following describes how to select features on the [Copy] screen.
For information on Simple Copy, refer to "Simple Copy" (P.95).
Note
1
Press the <Services Home> button.
88
then load a document. Otherwise, the
machine may not properly detect the
document size.
• When a standard size document is loaded on the document glass, the size of the document is
displayed in the message field.
• The features displayed on the screen depend on the configuration of your machine .
• When the Authentication or Accounting feature is enabled, a user ID and passcode may be required.
Ask your system administrator for the user ID and passcode.
<Services Home> button