Electrical Safety - Fuji Xerox ApeosPort-V C5575 User Manual

1 Before Using the Machine

Electrical Safety

This product shall be operated by the power source as indicated on the product's data plate.
Consult your local power company to check if your power source meets the requirements.
1
20
WARNING: Connect this product to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. The plug fits
only into an earthed electrical outlet. This is a safety feature. If the plug doesn't fit
to the outlet, contact an electrician to replace the outlet to avoid risk of electric
shock. Never use an earthed adapter plug to connect the product to the electrical
outlet that has no earth connection terminal.
Improper connection of a grounding conductor may cause electric shock.
Plug the power cord directly into a grounded electrical outlet. To prevent overheat
and a fire accident, do not use an extension cord, a multi-plug adaptor or a multiple
connector. Consult your local Fuji Xerox representative to check if an outlet is
grounded.
Connect this product to a branch circuit or an outlet that has larger capacity than
the rated ampere and voltage of this product. See the data plate on the rear panel
of this product for its rated ampere and voltage.
Never touch the power cord with wet hands. It may cause electric shock.
Do not put an object on the power cord.
Always keep the plug connection free of dust. The dusty and damp environment
may bring about minute electric current in a connector. It may generate heat and
eventually cause a fire accident.
To avoid the risk of electric shock and a fire accident, only use the power cord
supplied with this product or the ones designated by Fuji Xerox.
The power cord is exclusive use for this product. Do not use it for any other product.
Do not damage or alter the power cord. Damage and alteration may generate heat
and eventually cause electric shock or a fire accident.
If the power cord is damaged or insulated wires are exposed, contact your local Fuji
Xerox representative for its replacement. Do not use a damaged or uninsulated
cord to avoid the risk of electric shock and a fire accident.
(ApeosPort-V C7775/C6675, DocuCentre-V C7775/C6675 only)
This product uses 2 power cords. Plug off all the power cords to completely stop
power supply to this product.
(ApeosPort-V C7775/C6675, DocuCentre-V C7775/C6675 only)
Power capacity of this product is 10A per power cord. Connect each power cord to
the different power supply whose breaker of a switchboard is independent each
other. Do not connect power cords to outlets leading to the same breaker of a
switch board. Otherwise, a breaker may trip. Confirm power capacity of a breaker
before you connect peripheral devices to an outlet. Connect peripheral devices to
another outlet than that for a main product.