Fuji Xerox ApeosPort-V C5575 User Manual page 51

No. Component
13 Smart WelcomEyes Advance
(SWEA) pyroelectric sensor
14 Smart WelcomEyes Advance
(SWEA) reflection sensor
15 Smart WelcomEye s Advance
(SWEA) Access Lamp
16 Side tray (optional)
17 Stylus pen
18 Stylus pen holder
Left side and rear views of the machine
8
9
10
No. Component
1 USB 2.0 interface connector
(optional)
2 Top left cover
3 Upper left cover
4 Bottom left cover
The SWEA pyroelectric sensor works consistently, and when it detects
human presence in the detectable area, the SWEA reflection sensor starts
working.
When the SWEA pyroelectric sensor detects human presence, the SWEA
reflection sensor starts working, and when it also detects human presence,
the machine exits the Energy Saver mode.
While the SWEA reflection sensor detects human presence, the machine will
neither reset the settings automatically nor enter the Energy Saver mode.
The Access Lamp lights up while the SWEA reflection sensor detects human
presence.
Copies and prints are delivered here, facing up.
Used for touching the touch screen on the control panel to configure
settings.
Note • You can directly touch the touch screen not only with the stylus pen but
also with a finger.
Stores the stylus pen.
7
6
5
Connects to the cable of the Memory Card Reader or a USB memory device.
Open this cover to clear paper jams.
Open this cover by pressing the release lever to clear paper jams.
Note • Before you open the upper left cover, exit the Sleep Mode and then
switch off the machine.
Open this cover to clear paper jams. When Tray 6 is installed, open this cover
after moving Tray 6 to the left.
Machine Components
Function
1
2
3
4
Function
2
51