Start-Up Of Program - Nikon D200 Repair Manual

INC
VBA13001-R.3677.A
<Start-up of Program>
1. Double-click the file (D200.EXE), then Inspection and adjustment program for D200 starts.
2. To display in Japanese, select the radio button "JAPANESE" in "LANGUAGE" in the lower right-hand
corner of the screen.
However, this is not properly viewed in the English OS.
3. For "COM PORT" (communication port), the selection from "COM1" to "COM9" is available.
4. When the "HISTORY" button at the lower-left is pressed, the program version will be displayed.
5. Select each item button according to operation.
Follow the instructions on the next screen that will be shown after pressing the item button.
6. To finish the program, press the "Close (×)" button in the right-hand corner of the screen or "QUIT.".
- Ａ41 ･ -