Nikon D200 Repair Manual page 95

INC
VBA13001-R.3677.A
Procedure for installing USB driver
If this program is used by the USB interface, installing the USB driver is necessary.
But if the OS is "Windows XP", the driver is already preloaded so it is not necessary to install it.
(1) Set the USB of camera to "PTP".
(SETUP menu → USB setting → PTP)
(2) Connect the camera and PC by USB cable.
Turn camera ON.
(3) When "Add New Hardware Wizard" is displayed, click "Next".
(4) Select "Search for a better drive than the one your device is using now. (Recommended)", and click "Next".
(5) Click "Reference" of "Specify a location" and select the directory where the driver was copied, such as
"C: ¥D200¥PTP". Then click "Next".
- Ａ55 ･ -