Af Drive Unit - Nikon D200 Repair Manual

AF drive unit

Horizontal-shooting lever unit
・ Fix the AF drive-PCB unit (#328) with two screws (#1636).
Be careful NOT to pinch the AFFPC.
・ While holding the pedestal of the horizontal-shooting lever unit (#B355), turn the lever unit clockwise to apply
compression to the spring.
・ Fit the groove part of the coupling shaft (#342) in the U-part of the horizontal-shooting lever unit (#B355),
and tighten the screw (#1513).
・ Put the edge of the AF drive unit FPC into the hole of the I-base plate FPC, and make soldering bridges at four
locations.
#1636
#343x2
#B328
#344x2
- Ａ12 ･
Grease: G-92KA
#1513
-
INC
VBA13001-R.3677.A
#342
#B355