Nikon D200 Repair Manual page 47

Main condenser/DI-PCB
・Assemble the main condenser (#1067) in the body,
and attach two pieces of the both-sided adhesive
tape (#915).
※ Refer to the below for the lead direction of the
main condenser.
・Mount the DI-PCB (#1029), and tighten the screw
(#1564).
Direction of leads of
the main condenser
#915×2
- Ａ7 ･
When the main condenser is
mounted, the connector must be
closed.
Position by following the direction of the arrow
#1067
#1564
-
INC
VBA13001-R.3677.A
#1029