Nikon D200 Repair Manual page 57

10-pin plug
10-pin FPC unit
・Position the 10-pin plug (#41) so that the V-groove comes in the lower right-hand corner (viewed from the
front), then fit it in the holes of the back side of the 10-pin FPC (#1010), and assemble them into #26.
・ Apply Locktite to the screw (#65) and tighten it.
・ Fix the 10-pin FPC (#1010) with the screw (#1503).
・ Make soldering bridges of the 10-pin plug (#41) and 10-pin FPC at nine locations.
・ Make soldering bridges of 10-pin FPC (#1010) and lens contact-FPC at eight locations.
・ Solder six wires.
#B1008
#1010
#1503
Oil barrier:
OS-30MF
#968
Change page △ ×1
#1010
#26
- Ａ17 ･
Red: SCM-change PCB
Brown: SCM-change PCB
Black: SCM-change PCB
#65
Adhesive: Loctite
#41
-
INC
VBA13001-R.3677.A
Red: Main PCB unit
Black: Main PCB unit
Blue: Lens release SW
V-groove
サービス
計画課
Ｍ
JUL.7.2006